Dell PowerVault NX1950 Panduan Peningkatan - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Peningkatan untuk Penyimpanan Dell PowerVault NX1950. Dell PowerVault NX1950 18 halaman. For vmware esx server software
Juga untuk Dell PowerVault NX1950: Panduan Penyebaran (34 halaman), Panduan Informasi Penting (26 halaman), Memulai (49 halaman), Panduan Instalasi dan Pemecahan Masalah (48 halaman), Panduan Penyebaran (38 halaman), Panduan Referensi (4 halaman), Menyiapkan (2 halaman), Menggunakan (2 halaman), Panduan Konfigurasi (11 halaman)

Halaman Cetak
Dell PowerVault NX1950 Panduan Peningkatan
3 Import devices by performing the following:
Right-click the Devices icon in the Microsoft Management Console
a
and select Import Virtual Disk. Click Next.
Browse to the volume the .vhd files are located on. Select the .vhd file,
b
click OK.
Click Next and then click Finish.
c
Repeat step b and step c to import all .vhd files.
d
4 Create Virtual Disk-Target Associations by performing the following:
Right-click the Target and select Add existing virtual disk.
a
Select the virtual disk that you want to configure and click OK.
b
The virtual disk in associated to the Target and ready for use.
However, the storage disks are not ready for use. To resume usage of the
disks from the Initiator:
Go to the Host or Initiator and log on to the Targets that you created.
a
Go to disk management and verify that the disk is accessible and is
b
displayed as Healthy. If the disk is not active, right-click on the
volumes and click Reactivate.

Unsupported Configurations

Using the 3.0 and 3.1 Targets together in the same cluster configuration is not
supported.
Configuring 3.1 Target
15