- ページ 16

ストレージ Dell SD630-SのPDF 配備マニュアルをオンラインで閲覧またはダウンロードできます。Dell SD630-S 31 ページ。 Designed for scality ring

ページを印刷する

File Server (with one Connector)

Server

Either

management

Storage network

Static

Application

Static

network

NOTE: The Dell SD7000-S (Single or Dual Node) server requires two management IP addresses for

each Physical Server. The iDRAC port for each Physical Server provides concurrent access to iDRAC

and the OS. A Dell SD630-S server requires three management IP addresses including one for the

iDRAC port, which is not exposed to the OS, and two separate redundant connections for accessing

the OS.

For File Server solutions, each Connector requires two dual port PCI NICs.

The table here lists the quantity of IP addresses required for each additional Connector added to the

solution.

Table 5. IP address requirements for minimal solutions

File Server (with one Connector)

Static or DHCP

IDRAC server

Either

management

Server

Either

management

Storage network

Static

Application

Static

network

Switch requirements

This section defines the switch requirements for the management, application, and storage networks.

Management network

The Dell Storage Designed for Scality RING solution requires a switch for the storage network. The

selection depends on the Network Daughter Cards (NDCs) selected for the Dell SD7000-S and Dell

SD630-S servers, which include BT, SFP and SR Ethernet network interface options.

Application network

Dell recommends having two bonded network connections from each server to application network

through two separate redundant switches.

Object Storage (with one Connector)

Either

Static

Object Storage (with one Connector)

Quantity

Static or DHCP

Either

Static

Quantity