ページを印刷する
393803‐2 Startup procedure for EnSy AHU units
5. Adjust to desired supply air temperature.
6. Setting time and date.
This is important to get an alarm when it's time for filter change.
Press control button 4 once to get into 4. Preferences.
Press control button 4 one more time to get into 4.1 Time/date menu.
Change values with control buttons 2 (‐) or 3 (+).
Press control button 4 once to get to next step.
If you need to go back and wants to correct a field you can start over by pressing control button 4
number of times till you are back in the field you need to change.
Press control button 3 (OK) once to get back to 4 Preferences menu.
Landlord or, who is responsible for service in larger projects, to make an agreement for who to
change filters and from whom to order new filters.
Any agreements made, YES or NOI: ____________
We reserve the right to change technical data without notice http://www.ensy.no
REV:0_08.09.2016. KJK
Supply air temperature is set to 17°C from factory and can
be adjusted between 15 and 21°C.
Press control button 2 once to get into 2 Temperature
menu.
Change values with control buttons 2 (‐) or 3 (+).
After adjustments use control button 1 (Return) once to get
back to the start up menu.
Write down set temperature: ________________
(This can of course be changed by the landlord if desired)
Press control button 3 twice to get to Filter.
Press control button 4 once to get into 4.3 Filter menu.
Use control buttons 2 (‐) or 3 (+) to set wanted interval
before next filter change. Can be set to 6, 9 or 12 months.
Write down chosen interval: ______Months
(This can of course be changed by the landlord if desired)
Press control button 4 once (Filter OK!) and you will get Next
replace date in display.
Write down next replace date: ________________
Press control button 1 (Return)twice to get back to start up
menu.
Write down date:
________________
Page 5