- ページ 25

スイッチ Dell Force10 MXL BladeのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Dell Force10 MXL Blade 38 ページ。 10/40gbe blade switches
Dell Force10 MXL Blade にも：アプリケーションノート (6 ページ), 仕様 (2 ページ), マニュアル (27 ページ)

ページを印刷する

Assembling a Switch Stack

After you complete the initial switch configuration, the MXL 10/40GbE

Switch is powered up and operational. Stacking is supported on the 40GbE

ports on the base module or a 2-Port 40GbE QSFP+ module to connect up

to six MXL 10/40GbE Switches in a single stack.

Figure 1-9 shows an example using six MXL 10/40GbE Switches in a chassis.

The MXL 10/40GbE Switches are connected to operate as a single stack in a

ring topology using only the 40GbE ports on the base modules. You can use

the 40GbE ports on the base module and plug-in modules to create a stack in

either a ring or daisy-chain topology.

NOTE:

All MXL 10/40GbE Switches in the stack should be powered up with the

initial configuration before you attach the cables.

Figure 1-9. Six Stacked MXL 10/40GbE Switches

Assembling a Switch Stack