- ページ 8

スイッチ Dell Networking S4810のPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Dell Networking S4810 17 ページ。 Open networking
Dell Networking S4810 にも：仕様 (2 ページ), 設定マニュアル (17 ページ), インストレーション・マニュアル (42 ページ), スタートマニュアル (16 ページ)

2.4

Configure route for OOB management port (optional)

FTOS(conf)#management route X.Y.Z.0 /24 A.B.C.1

Note: X.Y.Z.0 is the network your management system is connecting from and A.B.C.1 is the gateway for

the switch. If your management system is on the same subnet as the switch, the previous step may be

omitted. The example above assumes a class C subnet mask.

2.5

FTOS(conf)#username admin privilege 15 password 0 yourpassword

FTOS(conf)#enable password level 15 0 yourpassword

2.6

Option 1: You can enable ports individually by entering the port number.

FTOS#configure

FTOS(conf)#interface tengigabitethernet 0/0

FTOS(conf-if-te-0/0)#switchport

FTOS(conf-if-te-0/0)#no shutdown

FTOS(conf-if-te-0/0)#exit

FTOS(conf)#exit

Option 2: You can enable multiple ports at once using the 'range' parameter.

FTOS#configure

FTOS(conf)#interface range tengigabitethernet 0/0 – 47

FTOS(conf -if-range-te-0/0-47)#switchport

FTOS(conf -if-range-te-0/0-47)#no shutdown

FTOS(conf -if-range-te-0/0-47)#exit

FTOS(conf)#exit

2.7

FTOS#configure

FTOS(conf)# interface range tengigabitethernet 0/0 – 47

FTOS(conf -if-range-te-0/0-47)#mtu 12000

2.8

FTOS(conf -if-range-te-0/0-47)#flowcontrol rx on tx off

SCG1000 | Dell Networking S4810 and Force10 S4810 Configuration Guide for EqualLogic SANs