- ページ 12

スイッチ Dell POWERCONNECT 5548PのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Dell POWERCONNECT 5548P 20 ページ。 Powerconnect 5500 series
Dell POWERCONNECT 5548P にも：リリースノート (15 ページ)

ページを印刷する

Manual Assignment

To assign unit IDs to the switches in the stack, do the following for each

switch in the stack:

1 Connect the switch to the terminal, as described in "Connecting the

Switch to the Terminal".

2 Turn on the switch to begin auto boot and press Return or Esc to abort and

enter the Start Up menu.

Startup Menu

[1]Download Software

[2]Erase Flash File

[3]Password Recovery Procedure

[4]Set Terminal Baud-Rate

[5]Stack menu

[6]Back

3 Select Stack menu to open the Stack Menu.

[1]Show unit stack id

[2]Set unit stack id

[3]Back

4 Select Set unit stack id. Enter either a Unit ID or 0. 0 indicates that the

unit ID will be assigned automatically.

NOTE:

The entire stack should be installed, as shown in Figure 2-1, before powering

up the switches.

For more information on stacking, see the Dell PowerConnect 5500 Series User

Guide on the Documentation CD.

Stacking