Dell POWERCONNECT 5548P 시작하기 매뉴얼 - 페이지 12

{카테고리_이름} Dell POWERCONNECT 5548P에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell POWERCONNECT 5548P 20 페이지. Powerconnect 5500 series
Dell POWERCONNECT 5548P에 대해서도 마찬가지입니다: 릴리스 정보 (15 페이지)

페이지 인쇄

Manual Assignment

To assign unit IDs to the switches in the stack, do the following for each

switch in the stack:

1 Connect the switch to the terminal, as described in "Connecting the

Switch to the Terminal".

2 Turn on the switch to begin auto boot and press Return or Esc to abort and

enter the Start Up menu.

Startup Menu

[1]Download Software

[2]Erase Flash File

[3]Password Recovery Procedure

[4]Set Terminal Baud-Rate

[5]Stack menu

[6]Back

3 Select Stack menu to open the Stack Menu.

[1]Show unit stack id

[2]Set unit stack id

[3]Back

4 Select Set unit stack id. Enter either a Unit ID or 0. 0 indicates that the

unit ID will be assigned automatically.

NOTE:

The entire stack should be installed, as shown in Figure 2-1, before powering

up the switches.

For more information on stacking, see the Dell PowerConnect 5500 Series User

Guide on the Documentation CD.

Stacking