- ページ 6
スイッチ Dell PowerConnect M8024のPDF リリースノートをオンラインで閲覧またはダウンロードできます。Dell PowerConnect M8024 9 ページ。 Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
Dell PowerConnect M8024 にも： リリースノート (27 ページ), 設定マニュアル (21 ページ), ファームウェアのアップグレード (24 ページ)
ページを印刷する
CLI Reference Manual Updates
OSPF
Title
maximum-paths <1-6>
show running-config
Title
show running-config interface [ {ethernet
<unit>/<port-type><port> | loopback <loopbackId>
| port-channel <Port-Channel Number>| tunnel
<tunnelId> | vlan <VlanId>}]
Commands Not Supported
Title
The following commands are not supported in the
Dell PowerConnect M8024 Series switches:
The duplex command in port aggregator
o
configuration mode.
The negotiation command in port
o
aggregator configuration mode.
The speed command in port aggregator
o
configuration mode.
The copper port commands:
o
Test copper-port tdr < port
number>
Show copper-ports tdr
PowerConnect M8024 Release Notes
Description
The input range of command "maximum-paths <1-2>" changes to
"maximum-paths <1-6>".
Description
This command has been enhanced so that it can be executed for a
specific interface, port-channel, or VLAN.
Description
These commands appear in the CLI Reference Manual but should not
have been included.
Page 4