Dell PowerConnect M8024 Nota de lançamento - Página 6
Procurar online ou descarregar pdf Nota de lançamento para Interruptor Dell PowerConnect M8024. Dell PowerConnect M8024 9 páginas. Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
Também para Dell PowerConnect M8024: Notas de lançamento (27 páginas), Manual de configuração (21 páginas), Atualização do Firmware (24 páginas)
Imprimir página
CLI Reference Manual Updates
OSPF
Title
maximum-paths <1-6>
show running-config
Title
show running-config interface [ {ethernet
<unit>/<port-type><port> | loopback <loopbackId>
| port-channel <Port-Channel Number>| tunnel
<tunnelId> | vlan <VlanId>}]
Commands Not Supported
Title
The following commands are not supported in the
Dell PowerConnect M8024 Series switches:
The duplex command in port aggregator
o
configuration mode.
The negotiation command in port
o
aggregator configuration mode.
The speed command in port aggregator
o
configuration mode.
The copper port commands:
o
Test copper-port tdr < port
number>
Show copper-ports tdr
PowerConnect M8024 Release Notes
Description
The input range of command "maximum-paths <1-2>" changes to
"maximum-paths <1-6>".
Description
This command has been enhanced so that it can be executed for a
specific interface, port-channel, or VLAN.
Description
These commands appear in the CLI Reference Manual but should not
have been included.
Page 4