ページを印刷する
1U front-rack installation
Configure the rails that are attached to the system.
1
Attach the inner-chassis member switch rails to the switch, items 1 and 2.
Item 3 shows the detail for the front standoff with the locking tab.
Figure 8. Switch rail attachment
1
Locking feature
3
Front standoff with locking tab
2
Line up the installed rails on the mounted ReadyRails. Slide the switch in the rack until it
is flush with front of rack, item 1.
About 3 inches before you fully insert your system, the rail locking feature engages. This
feature keeps the switch from inadvertently sliding out of the rack and falling, items 2
and 3.
2
Chassis
Hardware installation
17