- ページ 17

スイッチ Dell S4100-ON SeriesのPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Dell S4100-ON Series 21 ページ。
Dell S4100-ON Series にも：インストレーション・マニュアル (47 ページ), インストレーション・マニュアル (48 ページ), インストレーション・マニュアル (49 ページ)

Figure 8. Front rack installation

NOTE:

Do not the use the mounted Ready-Rails as a shelf or a workplace.

Tighten the two thumb screws and rack screws.

To remove the chassis from the rack or cabinet, press in the two side-release bars on the chassis at the same time and slide the chassis

forward.

Optics installation

For a list of supported optics, see the S4100–ON Series data sheet at

CAUTION:

ESD damage can occur if components are mishandled. Always wear an ESD-preventive wrist or heel ground strap

when handling the S4100–ON Series and its components.

WARNING:

When working with optical fibers, follow all warning labels and always wear eye protection. Never look directly into

the end of a terminated or unterminated fiber or connector as it may cause eye damage.

Position the optic so it is in the correct position.

The optic has a key that prevents it from being inserted incorrectly.

Insert the optic into the port until it gently snaps into place.

NOTE:

When you cable the ports, be sure not to interfere with the airflow from the small vent holes above and below

the ports.

www.dell.com/support

or contact your Dell representative.

S4100–ON Series installation