- ページ 11

ポータブル発電機 Entec EW-4200DのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Entec EW-4200D 19 ページ。 Marine diesel generators

Operation

STARTING THE ENGINE FOR THE FIRST TIME

(Continued)

CAUTION:

6. Put the Handcrank back into the Camshaft and rotate it

counterclockwise. Crank fast enough to develop oil pressure.

This will close the Oil Pressure Switch and make the oil light

on the control panel come on. When this happens, power is

applied to the Fuel Control Valve (6/18) and the Injection

Pump is energized. Each time the rotation passes the position

for fuel injection, the Injector will make a pronounced

squeeking noise as it sprays fuel into the combustion chamber.

If you do not hear the squeek, repeat the priming sequence

(step 3) and try again.

7. The next task is to return the engine to the normal compres-

sion mode. This will happen automatically when the Com-

pression Release Shaft is rotated to unlock the intake valve.

NOTE: This automatic feature will not function when

the small pin points anywhere between the 9 o'clock

and 12 o'clock positions.

Use the second slot of the tab on the Handcrank to rotate the

Compression Release Shaft to a position just past twelve

o'clock (once again, the Handcrank will stop against the valve

cover). This will program the Compression Release to index

one step for each rotation of the camshaft. The Compression

Release Shaft will index all the way around to the 9 o'clock

position in approximately seven revolutions of the camshaft.

8. OPEN THE SEA COCK.

9. Put the Off/Run/Start switch on the control panel in the Start

position. The engine will spin freely until the Camshaft

completes the seven turns. On the seventh turn the Compres-

sion Release will reset itself to normal compression mode.

When this happens, the engine will start. Quickly release the

start switch and set it to the Run position.

All three lights on the control panel should be illuminated and

will remain so until the engine is stopped by the operator, or

the safety system detects a problem (26/0).

Entec West, Inc.

CLOSE THE SEA COCK.

16710 SW 72nd • Portland, Oregon 97224 • (503) 624-7118

EW-4200D

Oil Light on Control Panel

Handcrank – second slot