- ページ 8
芝生とガーデン用品 EarthQuake 9800 SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。EarthQuake 9800 Series 19 ページ。 Two-man earth auger powerhead
EarthQuake 9800 Series にも： 取扱説明書 (16 ページ), 取扱説明書 (13 ページ), 取扱説明書 (20 ページ)
ページを印刷する
HANDLE BAR GRP
BOLTZ- t
WASHER
NUT
TRANSIASSION OU1PUT SHAFT
--- 3/8 - 16 X15 INCH BOLT
3/8 -16 Ell-NUT
FLEX COIL SHOCK TOP
Earthquokd
Operator's Manual
Two-Man Earth Auger Powerhead 9800 Series
ASSEMBLY
UNPACK POWERHEAD
1. Carefully lift the powerhead out of the box, remove any packing
material and cut any ties.
TOOLS REQUIRED
Two (2) 9/16"Wrenches
ASSEMBLY INSTRUCTIONS (SEE FIGURE 1)
Place the handle bar grip onto the frame.
Secure with two 5/16-18 x 1 1/2 inch bolts.
Install spring lock washers and lock nuts and tighten. Repeat for all
handles..
Insert the output shaft of the transmission in the open end of the
Flex Coil Shock Top.
Line up the bolt holes through the Flex Coil Shock Top and the
output shaft of the transmission.
Install the 3/8-16 x 1.5 inch bolt through the bolt hole.
Install the 3/8-1681-Way locknut on the bolt.
Using two 9/16 inch wrenches, tighten the lock nut and bolt.
FIVIJIlt I
8
Check for parts online at
www.getearthquake.com
or call 800-345-6007 M-F 8-5