EarthQuake 9800 Series Operatör El Kitabı - Sayfa 8
Çim ve Bahçe Ekipmanları EarthQuake 9800 Series için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. EarthQuake 9800 Series 19 sayfaları. Two-man earth auger powerhead
Ayrıca EarthQuake 9800 Series için: Operatör El Kitabı (16 sayfalar), Operatör El Kitabı (13 sayfalar), Operatör El Kitabı (20 sayfalar)
Sayfayı Yazdır
HANDLE BAR GRP
BOLTZ- t
WASHER
NUT
TRANSIASSION OU1PUT SHAFT
--- 3/8 - 16 X15 INCH BOLT
3/8 -16 Ell-NUT
FLEX COIL SHOCK TOP
Earthquokd
Operator's Manual
Two-Man Earth Auger Powerhead 9800 Series
ASSEMBLY
UNPACK POWERHEAD
1. Carefully lift the powerhead out of the box, remove any packing
material and cut any ties.
TOOLS REQUIRED
Two (2) 9/16"Wrenches
ASSEMBLY INSTRUCTIONS (SEE FIGURE 1)
Place the handle bar grip onto the frame.
Secure with two 5/16-18 x 1 1/2 inch bolts.
Install spring lock washers and lock nuts and tighten. Repeat for all
handles..
Insert the output shaft of the transmission in the open end of the
Flex Coil Shock Top.
Line up the bolt holes through the Flex Coil Shock Top and the
output shaft of the transmission.
Install the 3/8-16 x 1.5 inch bolt through the bolt hole.
Install the 3/8-1681-Way locknut on the bolt.
Using two 9/16 inch wrenches, tighten the lock nut and bolt.
FIVIJIlt I
8
Check for parts online at
www.getearthquake.com
or call 800-345-6007 M-F 8-5