- ページ 2

コントローラー ALLLED DynColor DC300-RL-RGB-PAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ALLLED DynColor DC300-RL-RGB-PA 6 ページ。 Dyncolor 300-rl rgb dmx controllers

ページを印刷する

Page 2 of 6

This guide contains important information about installing and operating your new DynColor™ 300-RL

safely and accurately.

Included in this Box

DynColor™ 300-RL RGB DMX Controller, 1 PCs

User Guide, 1 Set

Power Adaptor, 1 Set

Signal Connector(s)

Power Connector(s)

Unpacking

1) Unpack and carefully examine the product.

2) Report any damage and save all packing materials if any part is damaged during transport.

3) Do not attempt to use this apparatus if it is damaged.

Warnings

1) Risk of electric shock. Ensure that the power supply is off when wring or soldering the sections of the

device.

2) The controller shall be installed and operated by a qualified electrician or technician in accordance with

relevant local codes.

Precautions

1) Please avoid installing the controller in lightening, intense magnetic and high-voltage fields.

2) The controller should be installed indoors. Otherwise, please add rain shielding.

3) Make sure the wires are connected correctly and avoid short cut and burnt out the fuse.

User Responsibilities

The responsibility of complying with all state and local laws, ordinances, and regulations in regards to the

installation, maintenance, and operation of the device lies with the buyer and handler of the device.

These parties may include, but are not limited to the contractor, installer, purchaser, owner, and user of

the product.

Note:

The instructions and precautions set forth in this user guide are not necessarily all-inclusive, all

conceivable, or relevant to all applications as ALLLED cannot anticipate all conceivable or unique

situations.

PLANNING THE INSTALLATION

This controller installation requires planning to ensure timely, successful installation with minimal

complications and down time.

Planning Suggestions

Consult an Electrical Inspector to review all wiring plans.