- ページ 16

食器洗い機 Miele G 603のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Miele G 603 28 ページ。 45 cm wide fully integrated dishwashers
Miele G 603 にも：取付説明書 (28 ページ)

Installation

4. Adjusting the door front

When fitted the door front can be

adjusted up to a maximum of 2 mm

upwards or downwards to match

adjoining unit fronts.

^ Open the dishwasher door slightly.

^ With the door open, press the front

panel on one side against the door

outer panel.

^ Adjust the height of the door front on

this side using the lower recessed

adjusting screw (TORX T20).

higher = turn clockwise

lower = turn anti-clockwise

^ Then secure the door front on this

side by tightening the upper

recessed fixing screw (TORX T20) at

the side of the machine door outer

panel.

^ Repeat the process on the other side

of the door.

^ Close the dishwasher door.

^ Check the alignment of the door

panel again.

^ If it is not correctly aligned you may

need to loosen the screws and

re-adjust it to the correct alignment.

Once satisfied that the alignment is

correct:

^ Open the dishwasher door.

^ Tighten all fixing screws (upper

screws, TORX T20) at the sides.

^ Plug fixing screw and height

adjustment screw recesses with the

plastic stoppers supplied.