Miele G 603 설치 지침 매뉴얼 - 페이지 16

{카테고리_이름} Miele G 603에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele G 603 28 페이지. 45 cm wide fully integrated dishwashers
Miele G 603에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (28 페이지)

페이지 인쇄

Installation

4. Adjusting the door front

When fitted the door front can be

adjusted up to a maximum of 2 mm

upwards or downwards to match

adjoining unit fronts.

^ Open the dishwasher door slightly.

^ With the door open, press the front

panel on one side against the door

outer panel.

^ Adjust the height of the door front on

this side using the lower recessed

adjusting screw (TORX T20).

higher = turn clockwise

lower = turn anti-clockwise

^ Then secure the door front on this

side by tightening the upper

recessed fixing screw (TORX T20) at

the side of the machine door outer

panel.

^ Repeat the process on the other side

of the door.

^ Close the dishwasher door.

^ Check the alignment of the door

panel again.

^ If it is not correctly aligned you may

need to loosen the screws and

re-adjust it to the correct alignment.

Once satisfied that the alignment is

correct:

^ Open the dishwasher door.

^ Tighten all fixing screws (upper

screws, TORX T20) at the sides.

^ Plug fixing screw and height

adjustment screw recesses with the

plastic stoppers supplied.