- ページ 6

コントロールユニット Allmatic BIOS1のPDF 設置マニュアルをオンラインで閲覧またはダウンロードできます。Allmatic BIOS1 12 ページ。 Battery charging kit
Allmatic BIOS1 にも：インストール (2 ページ)

ページを印刷する

6. Menu

Entering the menu:

To enter the base menu settings keep pressed the MENU button for at least one second

To enter the advanced menu settings keep pressed the MENU button for at least five seconds

Navigation into the menu:

It is possible to move from an entry to another one using UP[+] e DOWN[-] buttons,

To change a parameter keep pressed the MENU button for at least 1 second until the parameter begins blinking,

so release the button.

Use UP[+] and DOWN[-] buttons to change the parameter

At the end keep pressed MENU for al least 1 second until the parameter stops blinking to save the change.

A quick pressure of the menu button is enough to leave a menu

6.1 Base settings menu:

tCL

Auto reclosing time (0 = disabled)

ttr

Auto reclosing time after transit(0 = disabled)

SEI

Obstacle sensitivity (0 = disabled 100 = maximum sensitivity)

Trq

Motor torque (running torque)

Slowing down mode

SSL

0 = normal

1 = fast with more torque

Step by step configuration

0 = normal (OP-ST-CL-ST-OP-ST...)

1 = alternated STOP (OP-ST-CL-OP-ST-CL...)

SbS

2 = alternated (OP-CL-OP-CL...)

3 = condominium – timer

4 = condominium with immediate auto reclosing

After black-out

Blt

0 = no action

1 = closing

Soft start

SSt

0 = disabled

1 = enabled

Amplitude of slowing down

LsI

P = personalized during learning

0...100% = percentage of stroke

Deceleration ramp amplitude

0 = disabled

1:9 = ramp duration

ATTENTION!

It is not advisable the disabling of the slowing downs and, if possible, use the "soft start" function.

6-1622241

rev.6

04/12/2018

DESCRIPTION

ITA

ENG

FRA

SELECTABLE

ESP

DEU

POR

Ex. Base menu

Ex. Advanced menu

VALUES

DEFAULT

min-max

0-900

0-30

0-100

10-100

100

0-1

0-4

0-1

0-100

0-9

UNITS

6 / 12