- ページ 40

オーブン Miele ESW 47XXのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele ESW 47XX 44 ページ。 Built-in warming drawer esw 408*-14; esw 47 series; esw 48 series
Miele ESW 47XX にも：取付説明書 (11 ページ), 取付説明書 (23 ページ)

ページを印刷する

Installation

Integrated installations

Custom made front panels can be installed with models

ESW 4702 FB and ESW 4802 FB.

The custom panel must be at least

made of heat resistant material 140 °F (60 °C). The front

panel, including handle, must not exceed 11 lb (5 kg) in

weight.

^ Install a handle to the custom front panel using

countersunk screws.

^ Remove the screws from the left and right sides of the

drawer front and carefully lift the control panel out of the

drawer (see chapter "Aligning the appliance front"). Be

careful not to pull or damage the power cord.

^ Remove the two screws on the inner side of the drawer and

remove the panel from the appliance front.

^ Pre-drill the custom front panel (see illustration).

3/8" (10 mm), t = 3/8" (10 mm)

" (19 mm) thick and