Miele ESW 47XX 작동 및 설치 지침 - 페이지 40

{카테고리_이름} Miele ESW 47XX에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele ESW 47XX 44 페이지. Built-in warming drawer esw 408*-14; esw 47 series; esw 48 series
Miele ESW 47XX에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (11 페이지), 설치 지침 매뉴얼 (23 페이지)

페이지 인쇄

Installation

Integrated installations

Custom made front panels can be installed with models

ESW 4702 FB and ESW 4802 FB.

The custom panel must be at least

made of heat resistant material 140 °F (60 °C). The front

panel, including handle, must not exceed 11 lb (5 kg) in

weight.

^ Install a handle to the custom front panel using

countersunk screws.

^ Remove the screws from the left and right sides of the

drawer front and carefully lift the control panel out of the

drawer (see chapter "Aligning the appliance front"). Be

careful not to pull or damage the power cord.

^ Remove the two screws on the inner side of the drawer and

remove the panel from the appliance front.

^ Pre-drill the custom front panel (see illustration).

3/8" (10 mm), t = 3/8" (10 mm)

" (19 mm) thick and