- ページ 34

換気フード Miele DA 219-2のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 219-2 40 ページ。 Ventilation system
Miele DA 219-2 にも：操作およびインストール手順 (44 ページ)

Connection for air extraction

Danger of toxic fumes.

Please heed the "Warning and

Safety instructions" to avoid the

danger of toxic fumes.

The cooker hood should be in-

stalled according to local building

regulations. Seek approval from the

building inspector where necessary.

– All ducting, pipework and fittings

must be of non-flammable material.

– The extraction ducting should be as

short and straight as possible.

– To ensure efficient air extraction the

diameter of the exhaust ducting

should not be less than 150 mm.

If exhaust ducting with a diameter

of less than 150 mm or flat ducting

were to be used, the noise level of

the cooker hood would increase

and extraction would be less effi-

cient.

Only reduce the diameter of the duct-

ing if absolutely necessary, e.g.

where narrower ducting has already

been installed.

– Only use wide radius bends. Tight

bends reduce the air throughput of

the cooker hood.

– Only use smooth pipes or flexible

hoses made from non-flammable ma-

terials for extraction connection.

– Where ducting is horizontal it must

be laid to slope away at at least

1 cm per metre.

This is to ensure that condensate can-

not drain back into the cooker hood.

– If the exhaust air is to be ducted into

the open air, the installation of a tele-

scopic wall vent is recommended.

– If the exhaust air is to be ducted into

a vent flue, the ducting must be di-

rected in the flow direction of the flue.