- ページ 6

換気フード Miele DA 3160のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 3160 36 ページ。 Ventilation system
Miele DA 3160 にも：操作およびインストール手順 (40 ページ), 寸法 (1 ページ), 操作およびインストール手順 (40 ページ), 操作およびインストール手順 (40 ページ), 操作およびインストール手順 (40 ページ), 操作およびインストール手順 (40 ページ)

ページを印刷する

IMPORTANT SAFETY INSTRUCTIONS

Installation

, WARNING

To reduce the risk of fire only

use metal ductwork.

Provided a larger distance is not

given by the manufacturer of the

cooktop, follow the recommended

minimum safety distances between a

cooktop and the bottom of the hood:

- 22" (550 mm) above electric cooktops,

- 30" (762 mm) above gas cooktops,

- 26" (650 mm) above an open electric

grill or an open electric boiler/fryer.

If there is more than one appliance

beneath the hood and they have

different minimum safety distances

always select the greater distance.

When installing a custom front panel,

regard the cooktop manufacturer's

advice on the use of easily flammable

material above the cooktop.

Be careful not to damage hidden

electrical wiring or plumbing when

cutting or drilling into the wall or ceiling.

Do not use an extension cord to

connect the appliance to electricity.

Extension cords do not guarantee the

required safety of the appliance, (e.g.

danger of overheating).

Do not install this hood over

cooktops burning solid fuel.

Any fittings, sealant, or materials

used to install the ductwork must

be made of approved non-flammable

materials.

Never connect an exhaust hood to

an active chimney, dryer vent, flue,

or room ventilating ductwork. Seek

professional advice before connecting

an exhaust hood vent to an existing,

inactive chimney or flue.

Ducted fans must always be

vented outdoors.

Make sure that the airflow in the

room is sufficient for combustion

and exhausting of all non-electric

heating appliances (water heaters, gas

cooktops, gas ovens, etc.), otherwise

backdrafts may occur. Follow the

heating manufacturer's guidelines and

safety standards or those published by

the National Fire Protection Association

(NFPA), or the American Society for

Heating, Refrigeration and Air

Conditioning Engineers (ASHRAE).

If in doubt, consult an experienced

professional.