- ページ 30

換気フード Miele DA 362-110のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 362-110 36 ページ。 Ventilation system
Miele DA 362-110 にも：操作およびインストール手順 (40 ページ), 操作およびインストール手順 (40 ページ)

ページを印刷する

If site conditions are not suitable for the

hood to be used for air extraction, the

appliance must be converted for

recirculation.

For recirculation mode the following

accessories can be ordered from your

Miele dealer or the Technical Service

Department:

– 2 conversion kits

for recirculation

mode

– 4 active charcoal

filters

^ The reducing collar must be used in

recirculation mode. Place the collars

into the exhaust connections and turn

left to lock them in place. Do not

insert the non-return flaps.

^ In recirculation mode, 2 cut outs must

be made, where the ducting ends, for

the installation of the recirculation

vents, b.

If installing the hood over an island or

in a cabinet at ceiling height, a

suitable cut-out has to be made in

the front panel, d.

^ The exhaust connection, a, and the

recirculation vent, b, are joined

together with a pipe or flexible duct,

c, cut to size.

When installing the recirculation

vents make sure that the slats point

towards the center of the room and

not to a wall or the ceiling.

^ Install the active charcoal filters (see

"Cleaning and Care").