Miele DA 362-110 Operating And Installation Instructions - Page 30
Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 362-110. Miele DA 362-110 36 pages. Ventilation system
Also for Miele DA 362-110: Operating And Installation Instructions (40 pages), Operating And Installation Instructions (40 pages)
Print Page
If site conditions are not suitable for the
hood to be used for air extraction, the
appliance must be converted for
recirculation.
For recirculation mode the following
accessories can be ordered from your
Miele dealer or the Technical Service
Department:
– 2 conversion kits
for recirculation
mode
– 4 active charcoal
filters
^ The reducing collar must be used in
recirculation mode. Place the collars
into the exhaust connections and turn
left to lock them in place. Do not
insert the non-return flaps.
30
^ In recirculation mode, 2 cut outs must
be made, where the ducting ends, for
the installation of the recirculation
vents, b.
If installing the hood over an island or
in a cabinet at ceiling height, a
suitable cut-out has to be made in
the front panel, d.
^ The exhaust connection, a, and the
recirculation vent, b, are joined
together with a pipe or flexible duct,
c, cut to size.
When installing the recirculation
vents make sure that the slats point
towards the center of the room and
not to a wall or the ceiling.
^ Install the active charcoal filters (see
"Cleaning and Care").