- ページ 19

換気フード Miele DDF 125のPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。Miele DDF 125 24 ページ。 External motor roof installation
Miele DDF 125 にも：操作およびインストール手順 (28 ページ), 取付説明書 (28 ページ)

ページを印刷する

DDF 125/150

* Lead flashing

The roof vent kit can be used for

installing venting through pitched tiled,

pantiled, slate or shingle roofs.

Consult a roof tiler for advice regarding

other types of roofing.

The roof vent kit is not suitable for

flat roofs.

Installation must only be carried out

by a qualified roof tiler.

^ Remove the roofing around the

installation area.

^ Bend the flashing upwards.

^ Position the vent kit on the roof with

the air outlet directed down the roof.

^ Secure the vent kit to the roof

substructure with the fixing plate.

^ Replace the roofing. Press down on

the flashing to ensure that it creates a

proper seal.

The flashing should be fitted under

the roofing at the top and above the

roofing at the sides and the bottom.

The vent kit stub has a diameter of

125 mm when the appliance is

supplied.

^ If a diameter of 150 mm is required,

the front ring of the stub must be cut

off at the join with a sharp knife (see

illustration).

^ Push the flexible ducting onto the stub

and secure it with a hose clip.

It has an integrated non-return flap.

Installation