- ページ 12
換気フード Miele Imperial DIA 1070-2のPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。Miele Imperial DIA 1070-2 28 ページ。
ページを印刷するAn indicator lamp shows when the
grease filter needs to be changed. The
operating time counter for the grease fil-
ter is set at the factory for a certain
number of hours but these can be
changed.
After this set time has elapsed, the
grease filter touch control indicator
lamp glows. The grease filter must then
be cleaned.
After the grease filter has been cleaned
and put back in place, the filter opera-
ting time counter must be re-set.
– To do this press the grease filter
touch control and hold for about 4
seconds.
The indicator lamp will go out.
12
Before reaching the end of the period
set, you can check the percentage of
the time set which has already passed.
– Use the On/Off touch control to
switch the fan on.
– Press the grease filter touch control.
One or several of the indicator lamps
for the
touch control will flash.
The number of flashing lamps shows
the percentage of the operating time
set which has already been used up.
1 lamp
= 25%
2 lamps = 50%
3 lamps = 75%
4 lamps = 100%
The operating hours completed remain
in the memory, even when the machine
is switched off or there is a power cut.