Miele Imperial DIA 1070-2 운영 및 설치 매뉴얼 - 페이지 12

{카테고리_이름} Miele Imperial DIA 1070-2에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele Imperial DIA 1070-2 28 페이지.

An indicator lamp shows when the

grease filter needs to be changed. The

operating time counter for the grease fil-

ter is set at the factory for a certain

number of hours but these can be

changed.

After this set time has elapsed, the

grease filter touch control indicator

lamp glows. The grease filter must then

be cleaned.

After the grease filter has been cleaned

and put back in place, the filter opera-

ting time counter must be re-set.

– To do this press the grease filter

touch control and hold for about 4

seconds.

The indicator lamp will go out.

Before reaching the end of the period

set, you can check the percentage of

the time set which has already passed.

– Use the On/Off touch control to

switch the fan on.

– Press the grease filter touch control.

One or several of the indicator lamps

for the

touch control will flash.

The number of flashing lamps shows

the percentage of the operating time

set which has already been used up.

1 lamp

= 25%

2 lamps = 50%

3 lamps = 75%

4 lamps = 100%

The operating hours completed remain

in the memory, even when the machine

is switched off or there is a power cut.