- ページ 16

換気フード Miele Ventilation SystemのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele Ventilation System 32 ページ。 Ventilation system

Cleaning and care

,WARNING

TO REDUCE THE RISK OF

FIRE, ELECTRIC SHOCK, OR

INJURY TO PERSONS,

OBSERVE THE FOLLOWING:

Before cleaning or servicing the

hood, disconnect it from the power

supply, see "Important Safety

Instructions".

The halogen bulbs are very hot

when in use. They stay hot for some

time after turned off. Use caution,

danger of burns.

Wet cleaning the hot bulbs will

cause damage.

Wait a few minutes after turning

them off before cleaning.

Cleaning the casing

Never use abrasive cleaners,

scouring pads, steel wool or caustic

(oven) cleaners on the hood. They

will damage the surface.

^ All external surfaces and controls can

be cleaned with a mild solution of

warm water and liquid dish soap

applied with a soft sponge.

^ Wipe dry using a soft cloth.

Do not use too much water when

cleaning the controls. Water could

penetrate the electronics and cause

damage.

Avoid:

– cleaning agents containing soda,

acids, bleach or chlorides,

– abrasive cleaning agents,

e.g. powder or cream cleansers,

– abrasive sponges, i.e. pot scourers

or sponges which have been

previously used with abrasive

cleaning agents.

These will damage the surface.

Glass surfaces

– Glass surfaces can be cleaned using

a glass cleaner.