Miele Ventilation System Çalıştırma ve Kurulum Talimatları - Sayfa 16
Havalandırma Davlumbazı Miele Ventilation System için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele Ventilation System 32 sayfaları. Ventilation system
Sayfayı Yazdır
Cleaning and care
,WARNING
TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
Before cleaning or servicing the
hood, disconnect it from the power
supply, see "Important Safety
Instructions".
,
The halogen bulbs are very hot
when in use. They stay hot for some
time after turned off. Use caution,
danger of burns.
Wet cleaning the hot bulbs will
cause damage.
Wait a few minutes after turning
them off before cleaning.
Cleaning the casing
Never use abrasive cleaners,
scouring pads, steel wool or caustic
(oven) cleaners on the hood. They
will damage the surface.
^ All external surfaces and controls can
be cleaned with a mild solution of
warm water and liquid dish soap
applied with a soft sponge.
^ Wipe dry using a soft cloth.
Do not use too much water when
cleaning the controls. Water could
penetrate the electronics and cause
damage.
16
Avoid:
– cleaning agents containing soda,
acids, bleach or chlorides,
– abrasive cleaning agents,
e.g. powder or cream cleansers,
– abrasive sponges, i.e. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents.
These will damage the surface.
Glass surfaces
– Glass surfaces can be cleaned using
a glass cleaner.