- ページ 32

デスクトップ HP 124708-001 - ProLiant Cluster - 1850のPDF 実施マニュアルをオンラインで閲覧またはダウンロードできます。HP 124708-001 - ProLiant Cluster - 1850 35 ページ。 Proliant essentials foundation pack installation guide
HP 124708-001 - ProLiant Cluster - 1850 にも：エラー防止マニュアル (12 ページ), テクニカル・ホワイトペーパー (12 ページ), ファームウェア・アップデート (9 ページ), 概要 (20 ページ), 実施マニュアル (26 ページ), 導入マニュアル (22 ページ), トラブルシューティングマニュアル (18 ページ), 実施マニュアル (11 ページ), インストレーション・マニュアル (2 ページ)

Issue 20

Adding an EISA fibre channel controller

Description

Solution

With the server shut down and power removed from the server, install the EISA

fibre channel controller in the server by following the procedures detailed below

in the "Solution."

To install the controller:

1. Run the System Configuration Utility to add the controller and configure

changes to system BIOS.

2. Restart the server.

3. Start the hardware wizard by right clicking on My Computer | Properties |

Hardware.

4. Select Add/Troubleshoot a Device. No devices will be found.

5. Select Add New Device from the Choose Hardware Device screen.

6. Select No, I want to select hardware from a list.

7. Select SCSI and RAID Controllers.

8. Select HP and HP Fibre Channel Host Controller (non PnP).

9. Click Next | Finish.

10. Restart the server.

To load the driver:

After the restart completes, the Found New Hardware wizard will display.

This process resolves the device listed as Unknown Device under the Device

Manager tree. This Unknown Device, the HP Fibre Channel Controller /E,

requires the CPQFCALM.SYS driver

NOTE

The device HP Fibre Channel

Host Controller (non PnP),

displayed under Device Manager

with a yellow exclamation point,

can now be removed from the

Device Manager tree.