- ページ 8

デスクトップ HP 520 - Notebook PCのPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。HP 520 - Notebook PC 15 ページ。 Notebook tour - windows vista
HP 520 - Notebook PC にも：ユーザーマニュアル (15 ページ), ソフトウェア・アップデート (12 ページ), ユーザーマニュアル (17 ページ), ユーザーマニュアル (20 ページ), セキュリティ・マニュアル (35 ページ), ユーザーマニュアル (25 ページ), ユーザーマニュアル (23 ページ), ハンドブック (35 ページ)

Using Computer Setup

The information and settings in Computer Setup are accessed from the File, Security, Diagnostics, and

System Configuration menus.

Open Computer Setup by turning on or restarting the computer, and then pressing

"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.

Because Computer Setup is not Windows-based, it does not support the TouchPad. Navigation

and selection are by keystroke:

●

To choose a menu or a menu item, use the arrow keys.

●

To select an item, press enter.

●

To close open dialog boxes and return to the main Computer Setup screen, press esc.

●

To view navigation information, press f1.

●

To change the language, press f2.

Select the File, Security, Diagnostics, or System Configuration menu.

To exit Computer Setup, choose one of the following methods:

●

To exit Computer Setup without saving your preferences, use the arrow keys to select File >

Ignore Changes and Exit. Then follow the instructions on the screen.

●

To save your preferences and exit Computer Setup, use the arrow keys to select File > Save

Changes and Exit. Then follow the instructions on the screen.

Your preferences go into effect when the computer restarts.

Chapter 2 Using Computer Setup

f10

while the

ENWW