- ページ 26

デスクトップ HP 8100 - Elite Convertible Minitower PCのPDF 設定・構成マニュアルをオンラインで閲覧またはダウンロードできます。HP 8100 - Elite Convertible Minitower PC 48 ページ。 Hp compaq convertible minitower business pc
HP 8100 - Elite Convertible Minitower PC にも：仕様 (2 ページ), クイックセットアップとスタートマニュアル (21 ページ), サポート一覧 (34 ページ), ソフトウェア設定マニュアル (9 ページ), 図解パーツ＆サービスマップ (4 ページ)

Enterprise Mode – AMT Setup and Configuration Steps:

The AMT Setup portion for Enterprise mode is the same as SMB mode. Repeat

Steps 1 through 15 to perform AMT Setup. This will take the system from Factory

mode to In Setup Mode.

Refer to Manual Mode – AMT Setup and Configuration for screen shots of MEBx

menus and full text. The following are quick steps for AMT Setup.

1) Get into the MEBx by pressing Ctrl-P during POST.

2) Enter the default password "admin".

3) Change the MEBx password, follow strong password guidelines.

4) Go into Intel ME Platform Configuration.

5) Check the Intel ME State Control, select Enabled.

6) Check the Intel ME Firmware Local Update Qualifier, select Always Open.

7) Go into Intel ME Power Control.

a. Go into ME ON in Host Sleep States, select Option 2 (Desktop: ON in S0,

ME Wake in S3, S4-5)

8) Go into the Intel ME General Settings.

The Intel ME Platform Configuration screen has more options than could be

displayed in one page. More options are available if the menu is scrolled

down.

9) Password Policy

Default Setting

Recommended Setting

This option will determine if the local MEBx password can be modified from a

remote console.

Option

Default Password

Only

During Setup and

Configuration

Anytime

: Default Password Only

Effect

This option will allow the MEBx password to be

remotely modified only if it is the default "admin"

password.

This option will allow the MEBx password to be

remotely modified only during Setup and

Configuration of the AMT platform.

This option will allow the MEBx password to be

remotely modified at any time.