- ページ 15

冷蔵庫 Miele K 12820 SD edtのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele K 12820 SD edt 44 ページ。 Refrigerator with dynamiccooling
Miele K 12820 SD edt にも: 操作および設置マニュアル (48 ページ), 操作および設置マニュアル (40 ページ), 操作およびインストール手順 (44 ページ), 操作およびインストール手順 (48 ページ)

Miele K 12820 SD edt 操作およびインストール手順
Your appliance has been fitted with a
warning system which ensures that the
temperature in the freezer cannot rise
unnoticed. An alarm will sound, and the
temperature display and the alarm
indicator light will flash if the
temperature becomes too warm.
The temperature the appliance is set at
determines the temperature the
appliance recognises as being too
warm.
For example, the alarm may sound and
the alarm indicator light may flash,
– After a power cut.
– If you freeze a large amount of food
at once.
Depending on the temperature in the
freezer, you should check the condition
of the food. If food has defrosted or
started to defrost, check that it is still
safe to use, and if so, use it as quickly
as possible. Defrosted food may only
be re-frozen after it has been cooked.

Door alarm

If the door has been left open for more
than approx. 60 seconds the alarm will
sound.

Activating the alarm system

The alarm system is always active. It
does not have to be switched on
manually.

Switching the alarm off early

The alarm will stop and the indicator
light will go out when the temperature
reaches the correct level again.
However, if the noise disturbs you, you
can switch the alarm off before this if
you wish.
^ Press the alarm off button.
The alarm will stop.
The indicator light will stay on until
the correct temperature has been
reached. The alarm system is then
ready should it be needed again.

Alarm

15