- ページ 39

クックトップ Miele KM 3010のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele KM 3010 48 ページ。 Miele km 3010 gas cooktop operating and installation instructions
Miele KM 3010 にも：操作およびインストール手順 (44 ページ)

ページを印刷する

Installation

Preparing the countertop

 Create the countertop cut-out. Re-

member to maintain the minimum

safety distances (see "Installation" –

"Safety distances").

 Seal any cut surfaces on wooden

countertops with a special varnish,

silicone rubber, or resin to prevent the

wood from swelling as a result of

moisture. The sealant must be tem-

perature-resistant.

Ensure that the sealant does not get

on the top surface of the countertop.

The sealing strip ensures that the

cooktop will sit securely in the cut-out

without slipping. Any gap between the

frame and countertop will become

smaller over time.

Installing the cooktop

 Attach the sealing strip provided un-

derneath the edge of the cooktop.

 Feed the cooktop power cord down

through the countertop cut-out.

 Place the cooktop in the center of the

cut-out. When doing this, make sure

that the seal of the appliance sits

flush with the countertop on all sides.

This is important to ensure an effec-

tive seal all round.

If during installation the seal around

the frame does not sit flush with the

countertop in the corners, the corner

radius (≤ R4) can be carefully filed

down to fit.

Do not use any additional sealant

(e.g., silicone) on the cooktop.

 Connect the cooktop to the power

supply (see "Installation – Electrical

connection").

 Connect the cooktop to the gas sup-

ply (see "Installation – Gas connec-

tion").

Installation