Miele KM 3010 Çalıştırma ve Kurulum Talimatları - Sayfa 39
Setüstü Ocak Miele KM 3010 için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele KM 3010 48 sayfaları. Miele km 3010 gas cooktop operating and installation instructions
Ayrıca Miele KM 3010 için: Çalıştırma ve Kurulum Talimatları (44 sayfalar)
Sayfayı Yazdır
Installation
Preparing the countertop
Create the countertop cut-out. Re-
member to maintain the minimum
safety distances (see "Installation" –
"Safety distances").
Seal any cut surfaces on wooden
countertops with a special varnish,
silicone rubber, or resin to prevent the
wood from swelling as a result of
moisture. The sealant must be tem-
perature-resistant.
Ensure that the sealant does not get
on the top surface of the countertop.
The sealing strip ensures that the
cooktop will sit securely in the cut-out
without slipping. Any gap between the
frame and countertop will become
smaller over time.
Installing the cooktop
Attach the sealing strip provided un-
derneath the edge of the cooktop.
Feed the cooktop power cord down
through the countertop cut-out.
Place the cooktop in the center of the
cut-out. When doing this, make sure
that the seal of the appliance sits
flush with the countertop on all sides.
This is important to ensure an effec-
tive seal all round.
If during installation the seal around
the frame does not sit flush with the
countertop in the corners, the corner
radius (≤ R4) can be carefully filed
down to fit.
Do not use any additional sealant
(e.g., silicone) on the cooktop.
Connect the cooktop to the power
supply (see "Installation – Electrical
connection").
Connect the cooktop to the gas sup-
ply (see "Installation – Gas connec-
tion").
Installation
39