- ページ 16

クックトップ Miele KM 406のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Miele KM 406 40 ページ。 Gas cooktop
Miele KM 406 にも：取扱説明書 (20 ページ), 寸法マニュアル (1 ページ), 取付説明書 (20 ページ), 取扱説明書 (28 ページ), 取扱説明書 (24 ページ), 取扱説明書 (20 ページ), 取付説明書 (28 ページ), 取付説明書 (20 ページ), 取付説明書 (40 ページ)

Installation KM 404 / KM 405 / 406

Fixing the support brackets

^ Position the two support brackets

supplied a in the positions shown in

"Fitting the spacer bars and support

brackets" so they are flush with the

top edge of the cut-out and secure

using the 3.5 x 25 mm screws

supplied. 2 screws are needed to

secure each support bracket.

The thickness of the worktop will

determine which drill hole is used.

Please note that height of the

support bracket for the KM 406 is

different to that for the KM 404 and

KM 405.

On a granite worktop a hole must be

drilled d at the position indicated to

secure each support bracket.

^ Using a piece of strong, double-

sided adhesive tape position the

support brackets supplied a at the

positions indicated flush with the top

edge of the worktop and secure each

bracket with one screw in hole d as

shown.

^ Place the gas hob in the prepared

cut-out.

^ Feed the electricity connection cable

through the cut-out and connect.

^ Make the gas connection.

(see relevant section).

^ Secure the gas hob from below

through the middle elongated hole b

in each support bracket using the

two screws supplied. Carefully adjust

the hob if necessary.