Miele KM 406 Інструкція з монтажу Посібник з монтажу - Сторінка 16

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Варильна поверхня Miele KM 406. Miele KM 406 40 сторінок. Gas cooktop
Також для Miele KM 406: Інструкція з експлуатації Посібник з експлуатації (20 сторінок), Посібник з розмірів (1 сторінок), Інструкція з монтажу Посібник з монтажу (20 сторінок), Інструкція з експлуатації Посібник з експлуатації (28 сторінок), Інструкція з експлуатації Посібник з експлуатації (24 сторінок), Інструкція з експлуатації Посібник з експлуатації (20 сторінок), Інструкція з монтажу Посібник з монтажу (28 сторінок), Інструкція з монтажу Посібник з монтажу (20 сторінок), Інструкція з монтажу Посібник з монтажу (40 сторінок)

Miele KM 406 Інструкція з монтажу Посібник з монтажу
Installation KM 404 / KM 405 / 406

Fixing the support brackets

^ Position the two support brackets
supplied a in the positions shown in
"Fitting the spacer bars and support
brackets" so they are flush with the
top edge of the cut-out and secure
using the 3.5 x 25 mm screws
supplied. 2 screws are needed to
secure each support bracket.
The thickness of the worktop will
determine which drill hole is used.
Please note that height of the
support bracket for the KM 406 is
different to that for the KM 404 and
KM 405.
16

Granite worktops

On a granite worktop a hole must be
drilled d at the position indicated to
secure each support bracket.
^ Using a piece of strong, double-
sided adhesive tape position the
support brackets supplied a at the
positions indicated flush with the top
edge of the worktop and secure each
bracket with one screw in hole d as
shown.

Building in the gas hob

^ Place the gas hob in the prepared
cut-out.
^ Feed the electricity connection cable
through the cut-out and connect.
^ Make the gas connection.
(see relevant section).
^ Secure the gas hob from below
through the middle elongated hole b
in each support bracket using the
two screws supplied. Carefully adjust
the hob if necessary.