- ページ 9

メディア・コンバーター ALLNIC AUDIO D-3000のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。ALLNIC AUDIO D-3000 11 ページ。 Digital to analog converter

tube short circuit is indicated. If the needle moves to the left of the two lines, either a tube is losing

emissions or has an open filament, or the power supply circuit requires adjustment. It would be highly

unlikely for any of these events to occur; however, if the meter should indicate an issue, please contact

your Allnic dealer for assistance.

TUBES

The D-D-3000 uses the following tubes :

Four (4) x 5842 (WE417A)

•

It is optional to remove the O-rings from the tubes. Some customers prefer them on; others off. Allnic

Audio recommends leaving them on.

All consequences of changing or attempting to change tubes are borne by the user unless by express

agreement between the owner and the Allnic dealer. The Allnic dealer, Allnic Audio and Audiomentors

are not liable in any way whatsoever for any injury or loss incurred by the user or for damage to the

D-3000, any of its parts, or tubes or replacement tubes resulting from the user changing or attempting

to change tubes.

SPECIFICATIONS FOR THE ALLNIC AUDIO D-3000 DAC

Inputs:

One (1) X optical ("Toslink") digital

•

One (1) X USB

•

One (1) X AES/EBU digital (XLR)

•

Two (2) X coaxial digital (RCA)

•

Outputs:

One (1) pair X unbalanced (RCA)

•

One (1) pair X balanced (XLR)

•

Output Frequency Range:

20Hz - 20KHz flat

•

Output RMS Voltage:

2.5 volts

•

Output Impedance:

150 Ω (Constant)

•