ALLNIC AUDIO D-3000 Kullanıcı El Kitabı - Sayfa 9
Medya Dönüştürücü ALLNIC AUDIO D-3000 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. ALLNIC AUDIO D-3000 11 sayfaları. Digital to analog converter
Sayfayı Yazdırtube short circuit is indicated. If the needle moves to the left of the two lines, either a tube is losing
emissions or has an open filament, or the power supply circuit requires adjustment. It would be highly
unlikely for any of these events to occur; however, if the meter should indicate an issue, please contact
your Allnic dealer for assistance.
TUBES
The D-D-3000 uses the following tubes :
Four (4) x 5842 (WE417A)
•
It is optional to remove the O-rings from the tubes. Some customers prefer them on; others off. Allnic
Audio recommends leaving them on.
All consequences of changing or attempting to change tubes are borne by the user unless by express
agreement between the owner and the Allnic dealer. The Allnic dealer, Allnic Audio and Audiomentors
are not liable in any way whatsoever for any injury or loss incurred by the user or for damage to the
D-3000, any of its parts, or tubes or replacement tubes resulting from the user changing or attempting
to change tubes.
SPECIFICATIONS FOR THE ALLNIC AUDIO D-3000 DAC
Inputs:
One (1) X optical ("Toslink") digital
•
One (1) X USB
•
One (1) X AES/EBU digital (XLR)
•
Two (2) X coaxial digital (RCA)
•
Outputs:
One (1) pair X unbalanced (RCA)
•
One (1) pair X balanced (XLR)
•
Output Frequency Range:
20Hz - 20KHz flat
•
Output RMS Voltage:
2.5 volts
•
Output Impedance:
150 Ω (Constant)
•