- ページ 2

リモコン Allo RemoteControl FAAC SLHのPDF 使用方法をオンラインで閲覧またはダウンロードできます。Allo RemoteControl FAAC SLH 2 ページ。

System coding :
System coding:
1. Simultaneously press push-buttons P1 and P2 of the master TX and release them when
the LED flashes (after about one second)
2. Press and hold down the learning button on the decoding card/RP receiver: the LED must
flash
3. While the master transmitter's LED is flashing, press and hold down a channel (the
transmitter's LED goes on with steady light)
4. Before releasing the learning button on the decoding card/ RP receiver, check if the LED
goes on with steady light for a couple of seconds to confirm that the "system code" was
saved.
5. Release the button of the Master TX channel.
Visit our website: www.Alloremotecontrol.com