Allo RemoteControl FAAC SLH Инструкции - Страница 2

Просмотреть онлайн или скачать pdf Инструкции для Пульт дистанционного управления Allo RemoteControl FAAC SLH. Allo RemoteControl FAAC SLH 2 страницы.

Печатать страницу

System coding :

System coding:

1. Simultaneously press push-buttons P1 and P2 of the master TX and release them when

the LED flashes (after about one second)

2. Press and hold down the learning button on the decoding card/RP receiver: the LED must

flash

3. While the master transmitter's LED is flashing, press and hold down a channel (the

transmitter's LED goes on with steady light)

4. Before releasing the learning button on the decoding card/ RP receiver, check if the LED

goes on with steady light for a couple of seconds to confirm that the "system code" was

saved.

5. Release the button of the Master TX channel.

Visit our website: www.Alloremotecontrol.com