- ページ 4

ゲートウェイ Dialogic IMG 1010のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Dialogic IMG 1010 10 ページ。 Connecting dc power
Dialogic IMG 1010 にも：取付説明書 (6 ページ), クイック・スタート・マニュアル (11 ページ), クイック・スタート・マニュアル (18 ページ), クイック・スタート・マニュアル (10 ページ), 取付説明書 (9 ページ), クイック・スタート・マニュアル (4 ページ)

Overview

This IMG 1010 Quick Start Guide is an abbreviated guide which explains how to connect

power and network cabling. For more information on setup, please either refer to the "IMG

1010 Installation and Setup Guide" on the Technical Publications CD supplied or go to the

Dialogic Technical Support Web Site at

information on installing and setting up the IMG 1010 and GCEMS.

NOTE: To access the Dialogic Technical Support website, you will need a username and

password. To obtain a username and password, you will need support contract with Dialogic.

Once a support contract is obtained, a username and password will be supplied via email.

Shipping Information

Review the packing list to check that all the items listed on the packing list have been sent.

Should any discrepancies exist, contact your Dialogic Representative immediately.

Connecting AC Power

Power Specifications

If the IMG 1010 is powered by AC voltage then the AC input power must conform to the

specifications in the table below. Insert one end of AC cord into rear of IMG 1010 and the

other end into a grounded wall outlet, uninterruptible power supply (UPS), or surge protector.

Power

Frequency

AC Power Module

The AC power docking station provides an AC input power module with an integrated fuse,

power switch, and standard three position female AC input connector. This connector

allows the docking station to interface with all variations of AC outlets by simply using a

standard power cable and compatible outlet plug.

For more information on connecting AC power see IMG 1010 - Installation and Setup Guide

> IMG 1010 - Hardware Installation in either the online documentation or supplied CD.

Dialogic Corporation

IMG 1010 Quick Start Guide

http://www.dialogic.com/support

120 – 240 VAC / 1.5 - 3 Amps

50 or 60 Hz

Part # 07-8728-03

for detailed

Operating Range

90 – 240 VAC

50-60 Hz

Page 4 of 9