- ページ 6
産業機器 ABB C1300のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。ABB C1300 16 ページ。 Advanced circular chart recorder
ページを印刷する
6
C 1 3 0 0/A DVA N C E D C I R C U L A R C H A R T R E C O R D E R | C I/C 1 3 0 0 - E N R E V. C
...4 Mounting
NOTICE
• The recorder can be inserted into a panel cut-out of any size between the minimum and maximum dimensions illustrated,
provided the cut-out is positioned centrally relative to the fixing holes. If the panel cut-out is larger than the maximum, a
locally manufactured adaptor plate is required.
• If panel-mounting to NEMA 4X hosedown standard is required, a continuous bead of suitable silicon sealant must be applied
between the case flange and the panel. Do not use the optional gasket.
Dimensions in inches (mm)
2
Mark four mounting holes
14.19
(360.4)
1.70
(43.2)
0.64 (16.25)
Minimum cut-out dimensions
3
5
Figure 4 Panel-mounting
4 holes 0.281 dia.
or tap for ¼ in. thread
14.00 (355.6)
12.72 (323.08)
minimum
11.25
12.72
(285.8)
(323.08)
minimum
1
Cut hole in panel
Drill four suitable holes
Optional gasket
Locate instrument
4
in cut-out
Secure in panel using
four bolts, nuts and washers
0.20 (5.0)
13.7 (348.0)
maximum
0.15 (3.8)
minimum
Ensure cut-out positioned centrally
between mounting holes
Maximum cut-out dimensions
14.6
(371.0)
maximum
0.15 (3.8)
minimum