- ページ 13
溶接システム Miller Axcess 300のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Miller Axcess 300 36 ページ。 Arc welding power source and wire feeder with meters
Miller Axcess 300 にも： オーナーズマニュアル (44 ページ), オーナーズマニュアル (48 ページ)
ページを印刷する
2-1. Specifications
Rated Output
300 A at 32 VDC,
240 A at 32 VDC,
60% Duty Cycle
100% Duty Cycle
Wire Type and Diameter
Solid Steel
Stainless Steel
.023 – 1/16 in
.023 – .035 in
(0.6 – 1.6 mm)
(0.6 – 0.9 mm)
* While idling
Operating Temperature Range – –20C to +40C
2-2. Duty Cycle And Overheating
60% Duty Cycle At 300 Amperes
6 Minutes Welding
Overheating
SECTION 2 – INSTALLATION
Max. Open
Max. Open
Circuit Voltage
38
Flux Cored
.030 – 1/16 in
(0.8 – 1.6 mm)
4 Minutes Resting
0
Minutes
Amps Input at Rated Output, 50 or 60 Hz; Three-Phase
200 V
230 V
54
47
Wire Feed
Dimensions
Speed
25–700 IPM
H: 37 in (940 mm)
(.65–17.8 m/min)
W: 19 in (483 mm)
D: 30-1/4 in (768 mm)
Storage Temperature Range – -30C to + 50C
100% Duty Cycle At 240 Amperes
Continuous Welding
15
OR
Reduce Duty Cycle
460 V
KVA
KW
23.5
18.6
13
Net Weight
275 lb
(125 kg)
Duty Cycle is percentage of 10 min-
utes that unit can weld at rated load
without overheating.
If unit overheats, thermostat(s)
opens, output stops, and cooling
fan runs. Wait fifteen minutes for
unit to cool. Reduce amperage or
voltage, or duty cycle before
welding.
Y Exceeding duty cycle can
damage
unit
and
warranty.
A or V
sduty1 5/95 / SA-187 478-A
OM-1317 Page 9
void