- ページ 4

分析機器 burkle ViscoSamplerのPDF 使用説明書をオンラインで閲覧またはダウンロードできます。burkle ViscoSampler 12 ページ。

ページを印刷する
English
General safety requirements
`
`
Read these directions for use carefully before using.
`
`
Keep these directions for use where they will be
accessible for all users.
`
`
Failure to comply with the directions for use shall
render all warranty conditions null and void and
may lead to personal injury and material damage.
`
`
The instrument must only be used by qualified
skilled employees.
Safety instructions before using
`
`
Follow the manufacturer's instructions and safety
instructions of the medium you are sampling.
`
`
When sampling hazardous substances, follow
the technical rules on hazardous substances (in
accordance with TRGS – (German) Technical Rules
on Hazardous Substances) and wear appropriate
protective equipment.
`
`
The instrument must only be used within the
confines of applicable material resistance and for its
designated purpose. Any other type of use will affect
the warranty/guarantee.
`
`
Do not use any force when operating the instru-
ment.
WARNING!
Damage to the respiratory tract and other organs
due to escaping or outgasing media.
`
`
When sampling hazardous substances, follow
the safety data sheet of the medium to be
sampled.
`
`
Wear the appropriate protective clothing.
NOTE!
Before using, the instrument has to be cleaned to
the extent of your (validated) cleaning process.
`
`
Measures of manual cleaning have to be carried
out in the cleaning/desinfection area and under
consideration of occupational health and safety.
`
`
Pay attention to the material resistance.
Safety instructions during and after use
`
`
The device can be used in the temperature range of
0 - 60 °C.
`
`
Pay attention to have sufficient space above during
the application (minimum height: height of the
maximum extended piston + 20 cm).
`
`
Do not perform any lever movements during the
application. The instrument may be deformed.
Layout and function
`
`
The instrument is made of PP (item no. 5331-1xx0)
or PTFE/FEP (item no. 5331-2xx0).
`
`
The instrument is suitable to take samples of viscous
substances such as pastes, mud, creams and oils.
`
`
The instrument is only suitable to take samples and
not for continuous operation.
`
`
The instrument is not suitable for the storage of
samples.
`
`
The instrument is maintenance-free and suitable for
steam sterilisation (up to 121°C).
Parts in contact with medium
`
`
PP (item no. 5331-1xx0)
`
`
PTFE/FEP (item no. 5331-2xx0)
Point out any damage in the packaging to the freight
forwarder/supplier immediately.
Safe sampling
WARNING!
Bodily injury due to uncontrolled escaping liquid
under pressure.
`
`
Wear the appropriate protective clothing.
Point sampling/soil sample
1. Slide the wiping ring  to the desired sampling
depth.
2. Slide the piston rod  with the aid of the handle 
into the instrument up to the stop.
3. Submerge the instrument into the medium to be
sampled up to the desired depth / to the ground.
4. Pull the handle. Thereby, the medium is sucked in by
the piston.
5. Remove the instrument from the medium to be
sampled.
6. Empty the sample into a suitable collecting cont-
ainer by sliding in the piston rod.
All-layer sample
1. Slide the wiping ring  to the desired sampling
depth.
2. Slide the piston rod  with the aid of the handle 
into the instrument up to the stop.
3. Pull the handle while submerging the instrument
into the medium to be sampled up to the desired
depth / to the ground. Thereby, the medium is
sucked in by the piston.