- ページ 3

浄水器 AQUAPHOR EXTRA-SOFTのPDF マニュアルをオンラインで閲覧またはダウンロードできます。AQUAPHOR EXTRA-SOFT 12 ページ。

1. Introduction

The Extra-Soft water purification unit (hereinafter referred to as the water purifier) was manufactured by Aquaboss Ltd. (Russia, St.

Petersburg).

The water purifier is designed for additional purification of drinking water from mechanical and colloidal particles, organic impurities, and

also eliminates excessive hardness, flavour, smell and colour of water in the municipal and local water networks (artesian wells, wells,

etc.), provided the requirements of this manual are met.

Water purifier materials are safe, non-toxic and do not release into water any matters, hazardous for human health and environment.

The water purifier meets the hygienic requirements and requirements of TU 3697009-50056997-2010.

1. Requirements for water supply

The water purifier is designed for post-treatment and water softening, corresponding to SanPiN (СанПиН) 2.1.4.1074-01. The

hardness of the water supplied should not exceed 10

Overall dimensions (length x height x width):

The pressure of the water supply system is not less than

The pressure of water supply no more than

Water temperature

Maximum Performance

Minimum service life at water hardness 10

Weight, not more than

No. Nomination

Casing assembly (1)

Modules (K5, K7):

Connecting pipes (p / m)

Tap 1/4 "

Service plug

Attention! The water purifier is not intended for use at minus temperatures.

271 x 495 x 190 mm

0.1 MPa (1 at)

0.6 MPa (6 at)

+5 ... + 35 ° С

100 l/h

1.5 m

10 kg

Quantity

1 piece

2 pieces

1 piece