- ページ 6

ウォーター・ディスペンサー Aquaport AQP-SFS-IHのPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。Aquaport AQP-SFS-IH 12 ページ。 Elite instant boil water cooler hot / cold

B. Elite instant boil water cooler Installation for filter bottle.

Please follow the instructions below if you are using a filter

bottle.

Do not turn on the water cooler until the following instruction

have been followed and water is running out of both taps.

1. Remove the bottle support and spike from the water cooler.

See Fig 1.

2. To remove the bottle supporter, turn it anti-clockwise and lift

up. NOTE: The bottle supporter can be difficult to remove due

to the clean air seal, so a bit of force is required to pull the

bottle supporter off the water cooler.

3. When the bottle supporter is removed you should be able to

see inside the stainless cooling tank.

4. Follow the instructions that come with the filter bottle for

correct installation.

5. Place the filter bottle on top of the water cooler and fill as per

the instruction in the filter bottle user manual.

Note: Filter bottles generally have a slower flow rate compared to

spring water bottles, hence it will take longer to fill the cooling

tank. Allow the cold tank to fill for 30 minutes before following

Steps 2-6 as explained in section A) Elite instant boil water

cooler Installation for Spring Water bottles.

4 INSTALLATION AND OPERATING INSTRUCTIONS

C. Product Use

Always closely supervise children around this appliance.

If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons in

order to avoid a hazard.

The Aquaport Elite instant boil water cooler has been rated to

provide a limited number of servings per hour. On average you

should be able to receive 2-4L of cold water and 4-5L of hot

water within 1hour. Higher ambient temperature will affect its

performance.

The thermostat has been set by the manufacturer and does not

need to be adjusted. Do not adjust the thermostat unless advised

by Aquaport. Unauthorised adjustment or modification to the unit

will void the warranty.

The hot water temperature cannot be

adjusted.

Do not hesitate to contact our Customer

Care Service line on 1300 764 325 or

Fig 1

Bottle Support