ページを印刷する
Seat Bottom
Fixing Bolt
Washer
Seat Frame
Side Plates
QR Rod
Seat Bottom Assembly for Burley
1.
Unpack the seat frame and the seat bottom from their sep a rate pack ag ing. Notice
that the hard ware for the seat bottom is installed on the seat bottom brack ets. Also,
the QR s and aluminum slider blocks are in stalled on the seat frame. To install the
seat bottom in the seat frame you must fi rst remove the hard ware from the seat
bottom brackets. This in stal la tion is easiest if per formed before in stall ing the seat
frame on the bi cy cle.
2.
Slide the seat bottom brackets between the two sides of the seat frame side plates.
Install the pivot blocks from the inside by in sert ing the a bolt with a washer through
the seat frame, the composite seat bottom bracket, another washer, and then an M8
nut. Continue this process until all four seat block holes have bolts running through
them. Tight en each bolt to 80-100 in/lb.
Burley Seat Bottom
Self-Locking
Aluminum Slider
Blocks
®
Seat Bottoms
Seat Frame
Seat Bottom
Bracket
Pivot Block
Nut
13