- ページ 2
浄水器 Aquasana OptimH2O AQ-RO-3のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Aquasana OptimH2O AQ-RO-3 11 ページ。 Whole house water filter
Aquasana OptimH2O AQ-RO-3 にも： オーナーズマニュアル (14 ページ), オーナーズマニュアル (10 ページ), オーナーズマニュアル (16 ページ)
ページを印刷する
REQUIRED TOOLS & MATERIALS
• Basic plumbing knowledge
• 1/ 8 " & 7/ 3 2" Drill Bits/Drill
• Tape Measure
• Adjustable Wrench
• Utility Knife
• Bleach
• Screwdriver (Phillips)
• Safety Glasses
H
F
J
I
K
L
O
M
N
WHAT'S INCLUDED
A System Manifold
H Water Storage Tank
B Carbon Filter Sump
I Eye Dropper
C Membrane Filter Sump
J Tank Connector
D Claryum Filter Sump
K Plumber's Tape
E Remineralizer
L Drain Connector
F Faucet
M Nuts & Bolts
G Gasket, Nut, Washer, Spacer,
N Foam Seal
Quick Connector (for faucet)
O Flow Restrictor &
90° Elbow
• Pencil
• Masking Tape
• Pan or Bucket
A
B
C
D
U
E
G
P
S
T
P Tubing 1/4" White
Q Tubing 3/ 8 " White
R Tubing 3/ 8 " Red
S Screws + Bracket
T Brass Tee
U Carbon Filter Cartridge
V Claryum Filter Cartridge
WARNING: Using a qualified installer is recommended.
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not covered under the warranty.
PLAN FOR INSTALLATION
Prior to installation, we recommend you read the entire manual to familiarize yourself with the
system, and help you determine the best location for installation. Please check and comply with
all local plumbing codes.
PREPARE SITE FOR INSTALLATION
NOTE: If you have metal drain pipes, consult a plumber for installation of drain connection.
1. Prior to installation, close the cold water shut-off valve.
2. Temporarily place system manifold, remineralizer, and
tank into the under sink cabinet or desired location
to ensure adequate space and proper positioning.
3. 3/ 8 " white tubing will be used to connect manifold to tank, and from faucet stem to
remineralizer. Measure out 3/ 8 " white tubing from the top of the tank to the outlet side of the
system manifold and mark 3/ 8 " tubing. Then measure remaining length of 3/ 8 " tubing from the
remineralizer to the desired location of the faucet hole to ensure there will be enough 3/ 8 "
tubing available for both connections. Wait to cut tubing and follow instructions below.
4. Remove system, remineralizer, and tank from under your sink to begin installation.
INSTALLATION OVERVIEW
V
Step 1 - Install Brass Tee Fitting
Step 2 - Install RO System Manifold
Step 3 - Install Water Storage Tank
Q
R
Step 4 - Install RO Faucet
L
HOT
NOTE: Keep these instructions for future reference
Step 5 - Install RO Drain Connector
Step 6 - Connect Tubing
Step 7 - Stage 1–3 Filter Installation
Step 8 - Sanitize, Pressure Test, Purge System
F
G
A
T
Stage
OptimH2O™
AQ-RO3-RO
RO Membrane
P
B
C
D
COLD
OptimH2O™
Q
R
OptimH2O™
AQ-RO3-RM
Remineralizer
J
E
H
OptimH2O™