- ページ 5

水ポンプ Aquascape Pro Pondless 49000のPDF 使い方とメンテナンスをオンラインで閲覧またはダウンロードできます。Aquascape Pro Pondless 49000 16 ページ。 Waterfall vault

PREPARE BASE

The base of the excavation should be smooth soil, ﬂ at and

free of lumps and debris. Check the size and depth of the

excavation by placing the Pondless

AquaBlox

into the excavated area. The AquaBlox

sit level on the front ledge of the Pondless

well as line up level to the side of the vault.

INSTALL GEOTEXTILE AND LINER

• Install Outer Geotextile - Lay the geotextile into the

excavation covering the bottom and sides. Multiple

sections of geotextile can be overlapped to accomplish

complete coverage.

• Install Liner - Lay the liner into the excavation and position

to cover entire storage basin. Do not trim the excess liner

material until later in the project.

www.aquascapeinc.com |

Waterfall Vault and

should

Waterfall Vault, as

See diagram below

CAN 1-866-766-3426 |

There should be approximately 6" between the

for example.

AquaBlox

and the soil. Add compactible material such as

sand, if existing soil conditions do not meet requirements listed

above. The compactible material should be spread to a 4"

minimum depth and compacted.

AquaBlox

should sit level on front ledge

as well as line up level to side of the vault.

• Optional Inner Geotextile - An optional second layer of

geotextile may be used within the lined storage basin. The

second layer is wrapped around the bottom and sides of the

AquaBlox

helping further protect the liner from the edges

of the AquaBlox

. The secondary inner layer of geotextile

is especially useful protection on bigger storage basins that

contain a larger quantity of AquaBlox

US 1-866-877-6637